Boost Your Wireless Router Signal By 200 feet

0
16
wifi router booster
Advertisements

Nowadays, the Internet plays an important part in our lives. Slower WiFi connection is one of the reasons for the mood switch of the people. We will tell you tips and tricks about WiFi router signal booster that will surely help you out. Do not rush towards your network operator for help. Before it, try to follow out these simple remedies mentioned below.

wifi router signal booster

Change your Roter’s Frequency band

In the case that you have dual-band WiFi router then try to switch between the frequency. Normally, the frequency is 2.4GHz band for the residential area. You can switch it to 5GHz. 2.4GHzrouters are quite common, so if you use the suggested one, it would have less traffic. One of the reasons for the lower network coverage is that there is too much traffic jam on the 2.4GHz band.

Moreover, stifling issues are prevented by using the suggested frequency band. The 5GHz frequency band is much faster than the 2.4GHz  frequency band. You need to follow the following steps in order to add 5GHz option

  1. Open router Web Browser
  2. Log in to router web browser
  3. Enable the option to get the admin credentials for the 5GHz frequency band

If you follow these steps, then you will not need to re-enter the password to every connected device out there. It saves a lot of time. However, it must be noted that some dual-band routers do not give the option to activate admin credentials. So, here’s a little tricky. Use the same SSID but name it differently. For instance, PakTales001 and PakTaled5GHz. It will help to recognize both of the bands.

Channel Selection – wifi router booster

 

Interference is another major issue. The places where there is so much population, there interference can be a big problem. If microwaves, wireless telephones have the same wavelength then the frequency of your WiFi router can be affected.

Modern routers are capable of switching across various channels. Especially, when they are connected with other devices. Routers can automatically choose the best channel, but if anyone from your vicinity is using that channel the signal congestion can occur.

The best router select where there are least chances of congestion to have occurred. The selection routers are expensive than traditional ones.

Control Quality (Quality of Service)

There are special tools which help to control the amount of bandwidth utilization by the apps. Modern routers come up with these QoS (Quality of Service) tools. Netgear also provides this facility. It is the best WiFi booster technique.

Let us take an example. You have to send an important business document urgently. On the other side, you are in a video call with your friends. It is taking too long to send the file. So, QoS settings will enable to set the priority. The priority of apps can be changed at any time of the day.

The modern routers also offer this in gaming console setting or one-click multimedia. The other way is that you go to advanced settings in the network’s administrator interface.  From there, you can easily change the priority.

Replace Your Antenna

wifi router signal booster

If you have a router with an internal antenna, then you can easily attach an external antenna to it. It generates a stronger signal strength. Some companies manufacture and sell an external antenna as an accessory. So, that you can attach them by manually.

 

Usually, you can opt between directional and omnidirectional antennas. Omnidirectional send signal to every direction out there whereas omnidirectional send a signal in a certain direction only. Some routers have built-in omnidirectional antennas. It is always suggested to use a directional wifi antenna booster. You just need to direct it in the position where you need a strong internet connection. It will automatically broadcast signal. Check out the company online and go through the details on what you want to buy.  Go through the best WiFi booster to buy. It can be the best internet wifi router signal booster.

Replace your hardware – Wifi Router Booster Trick

If you are using a too old router, then it is the right time to upgrade it. People believe that hardware is replaced only when it is broken. However, it should be upgraded when affects the performance. If your router is slower than 802.11 then replacement is a must.

The wireless standards are designed at lower bandwidths. The maximum hit for 802.11n is 300Mbps.  Its latest version supports up to 1Gbps. The era of next-gen WiFi 6 routers is not far away. Its maximum throughput is 10Gbps. Search for the latest router and upgrade it as soon as possible.

Either case is that your router is lastest but your system is older. Suppose it has a support of 802.11n bandwidth. You can attach a USB WiFi adapter. It will make the internet to work better. Only a single factor does not result in boosting strong signals. It should have other factors like band steering, QoS facilities and best channel selection. Apply this method as wifi router signal booster.

Wireless Coverage Range Extender

One of the problems that result in slower connectivity is Distance. There is a certain range through which wireless signal can travel. If a router’s transmission is limited and area to be covered is huge, then it will automatically affect the performance.

Advertisements

wifi router booster

It is also possible that the area is too big for a single router. The routers are able to broadcast until the limited range. There is always a weak spot. If you want to extend the range so that your network works properly then you need range extender in your area.

WiFi range extenders are identical to routers but they function totally differently. For example, they will get the current wifi signal from the router and broadcast it again. For the WiFi network router, The range extender just acts like a client. The client will also have an IP address like a computer system.

It is not a router, and do not work as router works, but, it has same rules and regulations for carrying out the procedure. The extender should be at a place near to weak spot so that where connectivity is stronger and the signal is extended. Moreover, it should also be placed at a place where it catches a strong signal. This is a super technique used as wifi router signal booster.

The generated signal does not work as efficiently as the main router but still, something is better than nothing. It is advised to connect the extender with Powerline or Ethernet port. It will work better than the wireless signal booster setup.

You do not need to buy this from the same company you got the router. However, try to buy those which offers seamless roaming feature.

Choose a suitable point

Here is the one more technique for wifi router booster. The wireless router establishes signals in a sphere-like shape. Some routers use omnidirectional antennas, and some use the other one. If you have an omnidirectional model than place it in the middle of the location. Whether it be your any corner of your home or an office. Do not place is where there are huge walls and furniture. It should be placed above the ground level. It can be 200 feet above approximately. This will optimize the reach of the frequency.

If it’s the directional model, then you are allowed to set it anywhere in the house. Just you need t0 to be careful about its adjustment and positioning. You are advised to locate where you need strong connectivity.

Mesh-Based WiFi System- Ultimate wifi router booster

Range Extenders make the dead zones alive. But they provide half of the bandwidth as compared to the main router. Also, it is difficult to manage two admin pages differently and you also get two SSIDs. It is such a hassle. You can convert your network to a mesh WiFi system. You just need an app for settings.

wifi router signal booster

The main aim is to replace your router instead of extending it. All you need is to connect one node to the modem. Then, set up the satellites where you want to place it. The app will check whether each node is placed at a suitable location and getting a solid signal or not.

Mesh setup automatically updates the firmware. It ensures the user has the latest security setup and results in better performance. However, it is not at all pocket-friendly. Hope you like this wifi router booster technique.

These are the remedies you can use to as WiFi router speed booster. It will be advantageous to both, the performance and internet connection. There are many methods, they need router stuff like repeaters or expanders. Try the suggested ones as wifi router signal booster which are mentioned above. If these do not work, then work with expanders or repeaters.

Maximize the router’s performance to get the best connectivity speed. Check WiFi booster on Amazon as well. Netgear nighthawk is also available online. Netgear WiFi extender is also available. You can search for the best RV wifi booster and best home wifi booster online as well.

 

 

5/5 (1 Review)
Advertisements

Leave a Reply